Animal Surgical Devices
Med Vet International Jorvet Single Paw Odyssey Urn, Small, Slate/Pewter, J0316SPS
Jorvets designer style single paw odyssey pet urn comes in a size small and a slate/pewter color.
Med Vet International Locking Screw, 2.7mm x 28mm, J1133L
Locking Screws and Plates. A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Plates 2.7mm 28mm
Med Vet International Male External Catheter Extended Self-Adhesive Seal Acrylic Medium 9207 Each
Male External Catheter Extended Self-Adhesive Seal Acrylic Medium 9207 Each
Med Vet International Latch Style Burr Set, J1180BP, 5-Pack
For use with J1180 Dental Unit. Latch style burrs have a retention groove cut in the proximal end.All burrs and disks are of quality German manufacture carbide. Burrs are designed to fit latch-style or friction fit contra angle. Latch Style Burr Set 5-Pack Includes Chamfer Round .023 Fissure Flame Inverted Cone .018
Med Vet International 4.5mm Cortical Self-Tapping Screws - 4.5mm Cortical Self-Tapping Screw, J0426IS, Each
4.5MM Cortical Self-Tapping Screw, Single 46mm
Med Vet International Cancellous Screw, Fully Threaded, 4.0 mm x 12mm, J0424B, 6 Pack
4mm Cancellous Screw, Full Thread. Use as cancellous screws where greater screw-bone interface is desirable. 6/pk.
Braintree Scientific RPC-1-Rat PieCage to 250g,41cm Dia 6.75cm H-Aerosol Delivery
Rat Pie Cages - easy to clean and to use. Circular cages hold up to 11 rats for whole body irradiation. Notched removable lid can be dialed to any of the ventilated pie-shaped chambers. Also use for temporary transport or storage of animals for acute studies. **Sold for research purposes only and not for human use**
Braintree Scientific RPC-1 - Rat Pie Cage to 250g, 41cm Dia 6.75cm H
Rat Pie Cages - easy to clean and to use. Circular cages hold up to 11 rats for whole body irradiation. Notched removable lid can be dialed to any of the ventilated pie-shaped chambers. Also use for temporary transport or storage of animals for acute studies. **Sold for research purposes only and not for human use**
Med Vet International 2.4mm x 8mm Stainless Steel Cortical Self-Tapping Screws, J1073BB, 6-Pack
2.4 DCPs and Screws. Many fractures in feline and small canine patients, regular 2.0 DCP is too small and the 2.7 CDP is too large. The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP. The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available as shown.
Replacement swivel holder for Instech MCLA, SMCLA balance arms.
The Instech GIMBAL (often referred to as a replacement swivel holder) is a mounting component designed for use with Instech's MCLA and SMCLA counterbalanced peripheral arms. This holder allows the swivel to tilt and rotate freely in multiple directions, reducing the mechanical stress on the animal's catheter and tether system. By providing this degree of freedom, the gimbal mount helps prevent tangling and ensures smooth fluid delivery during long-term infusion or sampling studies.
Features
- Application: Swivel mounting for counterbalanced balance arms
- Compatibility: Specifically for MCLA and SMCLA arm models
- Function: Multi-axis movement to reduce tether torque and tension
- Material: Durable construction for stable swivel positioning
- Design: Allows for quick swivel installation and removal
- Reliability: Essential for maintaining catheter patency in active animals
Braintree Scientific Microvette 100; 100 ul, conical inner tube Lithium-Heparin
Microvette 100/200; Provides all the benefits of a universally suitable capillary blood collection system. The Microvette 100/200 offers the ideal solution for collection of even the smallest blood volumes. Preassembled end-to-end capillary ensures a controlled collection to capillary technique. The Microvette enables blood sampling using either the special rim or gravity-flow principle without any problem. **Sold for research purposes only and not for human use**
Med Vet International Jorvet Casey E-Collar, 20cm, J0047D, 10/pack
The Jorvet 20cm Casey E collar is a disposable protective collar for dogs and cats. Made of a lightweight flexible plastic and designed to not annoy pets during rest. This E Collar is easy to fit on the patinet and then the collar is closed without the use of difficult tpaes and strings. The size of the Elizabethan collar can be adjusted according to the size of the patients head and then fasted by the straps that are attached.
Med Vet International Locking Screw 2.7mm x 38mm Star, J1133TQ, Each
Locking Screw 2.7mm x 38mm Star, J1133TQ, Each
Cole-Parmer Dwyer 160-24 Stainless Steel Pitot Tube 24" Insertion Length 5/16" Diameter
These standard 5/16-inch diameter pitot tubes feature hemispherical tips, which are nearly impossible to damage. The tubes are recommended for ducts 10 inches and larger in diameter. They have inscribed inch graduations on both sides to show depth of insertion at a glance, which helps identify the exact center of any duct. The tubes made of stainless steel comply with AMCA & ASHRAE specifications. They are suitable for use in temperatures up to 1500F and provide accurate readings when its tip is directed within 15 of air flow. The tubes come in seven sizes, ranging from 8 to 60 inches long.